Peeler Centrifuges

Peeler Centrifuge

for High Solid Throughput


Our Company is offering peeler type centrifuge machines that are suitable for low concentration slurries that come mixed with fine solids.

  • These peeler centrifuge machines are precision designed and manufactured with best technology in field and offer long maintenance free and smooth operational life.
  • We offer a wide range of peeler type centrifuge machines that are made using high quality materials as per set international standards. Non-uniform cake formations, due to effects of gravity can cause difficulty during washing. These difficulties are removed in the Peeler Centrifuge, which revolves around the horizontal axis. Cake discharge is carried out at full speed, by means of slurry knife which peels the cake onto Screw – Conveyor for discharge.
  • Principle application of Peeler Centrifuge is in high-output duties where strong crystalline materials (which require good washing and de watering) are recovered. This centrifuge also can separate almost any liquid-solid slurry.

Peeler Centrifuge Options


The centrifuges are offered in..

  • In total clean - GMP Construction with N2 blanketing for Pharma / Bulk drug.
  • in specific basket size/volume
  • in various materials of construction viz, Carbon Steel (M.S.) Stainless Steel (304/316/316L), Rubber Lining, HAL-R Lining etc.
  • with multi speed drive arrangement for specific product
  • as simple manually operated to, multi feed tank, fully auto controlled, PLC operated, SCADA Supported
  • a prototype centrifuge is available for conducting trials at our/customers works
  • Intensive washing or other treatment is possible during the separation process.
  • The method of operations of this type of centrifuge, together, with number of variations available permit their adaptation to difficult task of separation of solids from liquids.
  • Horizontal Peeler Centrifuge work either semi - or fully automatically, controlled in batch cycles. Thus giving following advantages.

Advantages & Features of Peeler Centrifuges


The centrifuges are offered in..

  • High rotational speed and higher filtration area result in higher separating effect (G-value).
  • High basket speed leaves only minimum moisture contents in the solids.
  • Horizontal arrangement of rotating the basket offer best conditions for feeding and discharging operations.
  • Thus simpler mechanisms/drives can be employed to carry out such operations. Since all operations are carried out at full-speed time and energy losses are minimized.
Horizontal Basket Peeler Centrifuges are successfully used in Pharmaceutical, Plastic, Organic & Inorganic Chemicals Industry for separating solids from solid quid slurry with 5 to 50% SOLIDS contents and particle size ranging from 2 MICRONS TO 10 MM. Products which are difficult to filter or decant can be easily separated using Peeler centrifuge. The unique feature of Horizontal Peeler Centrifuge is the constant basket speed i.e. all operations like Feeding, Drying, Discharging etc. are carried out at full basket speed. The sequence of operations can be (either semi or fully automatically) controlled by Electro hydraulic control panel.

STANDARD MODELS

Model No. 63H0.5 80H 0.9 100H 1.0 120H 1.5 140H 3.1 170H 4.1 210H 7.0
Basket Size (mm) 630 800 1000 1200 1400 1750 2100
Basket Speed (rpm.)-Max. 1440 1200 1200 1050 1000 900 760
Separation Effect-G" Value 730 640 800 735 790 790 700
Drive H.P. 15 25 40 75 100 125 200
Basket Volume (ltrs.) 36 70 110 180 450 750 1400
Filtration Area (sq.m2) 0.5 0.9 1.1 1.50 3.1 4.1 7.0

Peeler Centrifuge Options


The centrifuges are offered in..

  • In total clean - GMP Construction with N2 blanketing for Pharma / Bulk drug.
  • in specific basket size/volume
  • in various materials of construction viz, Carbon Steel (M.S.) Stainless Steel (304/316/316L), Rubber Lining, HAL-R Lining etc.
  • with multi speed drive arrangement for specific product
  • as simple manually operated to, multi feed tank, fully auto controlled, PLC operated, SCADA Supported
  • a prototype centrifuge is available for conducting trials at our/customers works
  • Intensive washing or other treatment is possible during the separation process.
  • The method of operations of this type of centrifuge, together, with number of variations available permit their adaptation to difficult task of separation of solids from liquids.
  • Horizontal Peeler Centrifuge work either semi - or fully automatically, controlled in batch cycles. Thus giving following advantages.

Our Manufacturing Process

The PEELER Centrifuge is also offered in GMP Execution with, (1) All parts From Stainless Steel - SS 304 or SS 316. (2) All Parts are ground smooth to 180 grit size to avoid accumulation of solids. (3) All model comes with Fluid Coupling for smooth running of Centrifuge. All SS Parts are welded by TIG Welding process. The Parts not being from SS are epoxy painted. They are offered in Vapour tight / Air tight execution, with Nitrogen Purging/Blanketing and Safety interlocks in Explosion/Flame Proof execution.

TYPICAL BATCH CYCLE

  • FEEDING The Suspension is fed from the storage tank to the basket rotating at full operational speed.
  • DRYING Under the influence of the centrifugal force the liquid is drained from the solids, through filter elements (usually filter cloth). The solids are collected as 'cake' in the basket.
  • WASHING If required, in order to remove the traces of mother liquor washing facility can be provided to thoroughly wash the solids during separation.
  • RE DRYING After giving wash or other treatment solids are further allowed to dry.
  • DISCHARGING Solids are 'peeled' off by means of full basket width scrapper and is discharged through chute in front cover of the machine or conveyed out by discharge screw.
  • HEEL REMOVAL The residual heel is removed by air jet or water / liquid jet to expose filter cloth before next cycle.





©2017 Whirler Centrifugals Pvt Ltd